American Bully Dog3D MODEL DESCRIPTIONIsn’t this articulated american bully adorable? ● This STL file is recommended for FDM Printers!● 3D Printing Time: 1 h● Approximately Length : 10 cm3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)● Line Width/ Nozzle: 0.4 mm● First Layer Line Width: 0.48 mm / 120%● Average Speed: 20mm/s (First Layer) / 30mm/s (All the other layers)● Recommended Initial Layer Height: 0.16 mm● Recommended Layer Height: 0.16 mm● Recommended Perimeters/ Walls: 3.● Recommended Infill (%): 10% (Gyroid)● Needs Support: No.● Build Plate Adhesion: Skirt.