3D MODEL DESCRIPTION

Tyrannosaurus Rex is a very long and aggressive name for such a short and friendly dino.

This STL file is recommended for FDM Printers!3D Printing Time Based on Ender 3: 11 Hours 37 Minutes (will vary accord to you printer model)Approximately Height: 15 cm

3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)

Line Width/ Nozzle: 0.4 mmFirst Layer Line Width: 0.48 mm / 120%Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)Recommended Initial Layer Height: 0.16 mmRecommended Layer Height: 0.16 mmRecommended Perimeters/ Walls: 3.Recommended Infill (%): 10% (Gyroid)Needs Support: No.Build Plate Adhesion: Skirt.

The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.

Happy Printing!