3D MODEL DESCRIPTION

Sabotender (Cactuar) from Final Fantasy Series.

This model comes with two files: one version has slightly thickened and rounded head spikes for easier printing, while the other stays faithful to the original design with thin, sharp spikes. You can choose whichever version best suits your printer’s capabilities and printing conditions.

The files are scaled to my size preference, but you may need to adjust the scale to fit your needs.

License: Private Use Only / No Commercial Use / No Derivatives

IMPORTANT: Do NOT share, redistribute, or sell these files under any circumstances—whether for free or commercially!

3D PRINTING SETTINGS

This model has been specifically tested using both an Ender 3 Pro and a Bambu Lab A1 with a 0.4mm nozzle and PLA filament.The following print settings were used:

Layer Resolution: 0.12mm (high quality) / 0.2mm (standard quality)

Filament: PLA

Printer Type: FDM

Nozzle Size: 0.4mm

The model prints very well with these settings and is recommended for use with PLA filament for optimal results.

** Supports are required. Please use the print settings that work best based on your experience.