Inspired by Korean folklore from the Joseon Dynasty and dark fantasy, comes Sa-nyeo, the Snake Woman. This imposing figure combines the elegance of the traditional Korean hanbok with a monstrous, reptilian nature that will challenge your printing and painting skills.Design Features:High definition details: Faithfully preserves the intricate textures of the scales on the snake's skin and skirt, the natural wrinkles of the hanbok fabric and the traditional hairstyle (jjokjin meori) with its hairpin (binyeo).Single Piece: The model comes in a single STL file (it is not divided into parts), ensuring that you will not lose symmetry or have visible joints when assembling.Print Guide & Recommendations:IMPORTANT NOTICE: Due to the complex organic pose of the snake enveloping the character, arms and exposed jaw, this model requires a considerable amount of supports.Type of Support: It is highly recommended to use Tree Supports in your laminator (OrcaSlicer, Bambu Studio or Cura). Tree-type organic supports will greatly facilitate detachment in delicate areas such as the fingers and tongue, protecting textures.Location: Activate the On buildplate only option to prevent the supports from being generated on the relief of the dress itself and damaging the scales.Layer height: 0.12 mm or 0.16 mm to capture the maximum micro-relief of clothing and scales.Material: Optimized for large-scale filament (PLA/PETG) or Resin (SLA) for an ultra-defined miniature finish.