This is a lifesize Modell of BD-1 from the Computer Game Star Wars Jedi fallen order.

Important Remark: There is a second file to add Lights and a stim thrower, if you want to add the stim thrower you Need the altered head out of the other Thing, so don´t print the head part in this Thing, as it is the largest part which takes up to 22 Hours to print (on an anycubic s in normal Quality (0.2mm slices).

[update 20.02.20] Uploaded a second neck inside part with stronger spring to hold the head better in place when the neck is Extended. (doubled the thickness of the spring)

I recommend that one (neck_inside_1x1xM stroner spring) instead of the normal neck inside if you apply Light to the head due to the weight of the batteries. It replaces the normal neck inside and as with this you have to print it two times, one normal and one mirrored.

[update 18.2.20] Uploaded a fully assembled model. (complete.stl) At the hip there is a gap between the parts, thats because I had to shrink the main Body during the design phase so it matches the original dimensions better anf it wasn´t ideal to move the leg parts.

[update 11.2.20] Exchanged the file Body_front_plate to Body_front_plate_V2 as the old Version leaves a gap between Body and plate on the top of the plate thank you to user Stromfire for finding the deviation.

[Remark 27.1.20] As there where some Questions in the comments: Some of the parts may seem a Little odd to print if you follow the printing recommendations. The reason is that I tried to get the best stability out of the parts when using a Extruder Printer (which I think most People here do). Therefor some of the parts have been splitted in different parts which are easy to print and have also a sound structure for their function. This is why I highly recommend to stick to the printing recommendation pdf and print those parts as shown. Mainly the parts which have a funbction as Joints and for moving parts.