Print your own screen accurate Death Watch / Axe Woves helmet, as seen in The Mandalorian.

Rangefinder attaches with an M4x20mm countersink screw and M4 nut.Ear cap attaches with three M3 Hex nuts glued into the ear cap, and screwed in from the inside using two M3x8mm Screws at the bottom, and one M3x10mm screw on the top.Visor bracket attaches by gluing M3 Hex nuts into the helmet, and the bracket screws on using M3x6mm countersink screws.

Slimmer visor bracket included for those wanting the pinched visor look which Axe Woves and the One Stripe Death Watch Mando have.Scratches on the visor are specific to Axe Woves and One Stripe, but will be fine for custom builds and can easily be filled in using spot putty or what ever body filler you use to smooth your prints!

Hardware required:

• Five M3 Hex Nuts
• Two M3x6mm Countersink Screws
• One M3x10mm Button Head Screw
• Two M3x8mm Button Head Screws
• One M4x20mm Countersink Screw
• One M4 Hex Nut

These files are for personal use.I cannot accept refunds for digital items.