3 sizes of vases for making silicone mold

You can see the exact dimensions of all three models in the photos

When making the mold, be sure to pay attention to the following points so that you can produce a good mold :

After you have printed all the parts in 3D, try to polish them. All parts must be well assembled.

The inner part should be well smoothed so that after the silicone dries, you can remove it from the silicone mold. My suggestion is to use polyester putty. Apply the polyester putty all over the inner part. After drying, polish it with sandpaper to reach a very smooth surface.

Now assemble the parts according to the pictures, then fill all the seams with hot glue or plaster so that they do not leak from the seams when pouring silicone.

Now you can pour the silicone into the created space and produce a silicone mold.

If you need help or have any questions during the production process, please Contact me via email below. I will try to answer you as soon as possibleEmail : saeedkhodayari.net@gmail.com

You can also order your own custom designs via this email