1/16
Atention: Please, this 3D model is only for personal printing (Please contact me if you want to use it for Commercial Purposes)
All files are in STL format.
Model printed in parts.
CUT TYPE 1 - STL file with the blade, the handle and the Power Disc splited into 2 parts.
CUT TYPE 2 - Blade splited into 4 parts, handle with pins to fit them. The Power Disc is splited into 2 parts.
CUT TYPE 3 - Blade splited into 8 parts, handle splited into 2 parts with pins to fit them. The Power Disc is splited into 2 parts.
UNCUT - STL full uncut.
BLADE UNCUT + DISC - Blade full with separeted Power Disc.
Size: 912mm (91cm)
UPDATE
CUT TYPE 1 - STL file with the blade splited into 2 parts, the octagonal part, the handle splited into 2 parts, the Power Disc splited into 2 parts and a cylindrical pin that allows you to rotate the octagonal part and the part that fits the disc.
CUT TYPE 2 - Blade splited into 4 parts, the octagonal part, the handle splited into 2 parts, the Power Disc splited into 2 parts and a cylindrical pin that allows you to rotate the octagonal part and the part that fits the disc plus pins to fit them.
CUT TYPE 3 - Blade splited into 8 parts, the octagonal part, the handle splited into 3 parts, the Power Disc splited into 2 parts and a cylindrical pin that allows you to rotate the octagonal part and the part that fits the disc plus pins to fit them.
UNCUT - STL full uncut.
BLADE UNCUT + DISC - Blade full with separeted Power Disc.
Size: 900mm (90cm)
IMPORTANT: The changes I made in this update do not affect the black box fitting, the holster fitting and not even the power disc fitting. It remains 100% compatible with this new model of the Spin Sword that is more faithful to the original.
The STL files are able to be printed as a cosplay item, display item, miniature item.
This model is a dummy replica item.
For FDM of DLP/SLA tecnology
FDM Config.:
Layer height 0.1Perimeter Shell 3Fill 10/15%Supports are neededSpeed 60-70%
This 3D model of the Spin Sword was made for fans of the Power Rangers Samurai/Samurai Sentai Shinkenger and also for everyone who likes swords in general.
ATTENTION: All parts were cut thinking of the size of the printing bed of the 3D printers and not for each color that the part has. So the part of coloring the pieces before/ after being printed is up to the customer’s preference!
It is totally prohibited to edit, manipulate and mix this file for resale. The use of images to promote other products is also prohibited. The modeling contains easily identifiable shapes.
