Modular nigiri sushi consisting of 2 or 3 interlocking parts, depending on whether you have chosen nigiri with or without seaweed.Modularity allows you to print separate pieces in different colors thus limiting post-production work related to unique, non-modular models.Inside the .zip file you will find two different settings depending on the relative tolerance of your printer, to ensure the best printing of the piece.If you have an inaccurate printer, I recommend printing the files inside the tolerance-0.2 folder, if you have a very precise printer, you can print the files inside the tolerance-0.1 folder.I recommend using the supports only in contact with the print bed.I recommend a layer quality of 0.1 mm or 0.2 mm.I recommend slicing according to the guidelines shown in the photo, so that you can print the parts in the simplest way possible and you can remove the supports in the shortest time required.In summary, a good print setting could be the following:

(Files tolerance-0.1)layer quality / height 0.1mmmedia yes but only contact with the print bed

(Files tolerance-0.2)layer quality / height 0.2mmmedia yes but only contact with the print bed

Print settings for Ender 3 and Ender 3 Pro:

(Quality 0.1mm)Layer height 0.1Initial layer height 0.2Line width 0.44Initial layer line width 100%ShellWall thickness 1.76Top / bottom layer thickness 0.8Filling the gaps between the walls in all possible pointsFillingDensity 20%Cube filling configurationMaterial (PLA SUNLU)Printing temperature 190Initial layer printing temperature 215Initial print temperature 190Final printing temperature 190Print bed temperature 60SpeedPrint speed 50Travel speed 150Printing speed of the initial layer 20ShiftsEnabling retraction yesRetraction distance 5Retraction speed 50Combing everything modeCooling down100%SupportMedia positioning Contact with the print bedStand overhang angle 65Print bed adhesionskirt

(Quality 0.2mm)Layer height 0.2Initial layer height 0.2Line width 0.44Initial layer line width 100%ShellWall thickness 1.76Top / bottom layer thickness 0.8Filling the gaps between the walls in all possible pointsFillingDensity 20%Cube filling configurationMaterial (PLA SUNLU)Printing temperature 190Initial layer printing temperature 215Initial print temperature 190Final printing temperature 190Print bed temperature 60SpeedPrint speed 50Travel speed 150Printing speed of the initial layer 20ShiftsEnabling retraction yesRetraction distance 5Retraction speed 50Combing everything modeCooling down100%SupportMedia positioning Contact with the print bedStand overhang angle 65Print bed adhesionskirt