A premium collection of 85 decorative CNC border relief designs for woodworking, furniture decoration, wall panels, doors, frames, gypsum/plaster decoration, and interior architectural projects.

This bundle includes elegant ornamental border patterns with floral, classic, baroque, rococo, vine, scroll, braided, geometric, and decorative relief styles. The designs are suitable for CNC router carving and can be used in luxury furniture, decorative wall panels, mirror frames, door trims, cabinets, wooden panels, and interior décor applications.

The files are provided in RLF format for ArtCAM 2018, making them suitable for users who work with ArtCAM relief projects and CNC carving workflows.

Main Features:

85 decorative CNC border relief modelsFormat: RLF – ArtCAM 2018Design type: 3D relief carving bordersSuitable for wood, MDF, gypsum, plaster, foam, resin, and similar carving materialsIdeal for furniture, panels, doors, frames, interior décor, and CNC decorative projectsApproximate design size shown in previews: 2100 × 120 mmRelief depth options shown in previews: 10 mm and 30 mmReady for scaling and toolpath preparation inside ArtCAM

Important Note:This is a digital product only. No physical item will be shipped. The buyer should open the files in ArtCAM 2018, check the size and relief depth, then adjust the scale according to their CNC machine, material thickness, and project requirements.

Settings and Manufacturing Instructions:

Open the RLF file in ArtCAM 2018.Check the model dimensions before machining. The preview size is approximately 2100 × 120 mm, but the design can be scaled to fit your project.Check the relief depth before creating toolpaths. Some designs are prepared around 10 mm relief depth, and some around 30 mm relief depth. Adjust the Z height if needed.Choose the material according to the final use: MDF, hardwood, softwood, gypsum board, plaster, foam, resin, or similar CNC-compatible material.Set the material thickness higher than the relief depth for safe machining.Use a roughing toolpath first to remove excess material.Use a finishing toolpath with a ball nose cutter for clean relief details.Recommended tools depend on the final size, but common options are:Roughing: 6 mm or 8 mm end millFinishing: 3 mm, 2 mm, or smaller ball nose cutter for fine detailsUse smaller tools for highly detailed floral and scroll designs.Always run a simulation in ArtCAM before machining.Secure the material properly on the CNC bed before cutting.Test the design on a small sample piece before full production.Sand and finish the carved piece after machining if used for wood or MDF.For gypsum or plaster production, the design can be used as a master relief, mold, or decorative panel reference depending on your manufacturing workflow.

Recommended Uses:

CNC furniture decorationWall panel bordersDoor and cabinet trimsMirror and frame decorationLuxury interior décorWooden decorative stripsGypsum and plaster decorative moldingClassic and modern architectural ornament projects

File Format:RLF ArtCAM 2018

Software Compatibility:ArtCAM 2018 or compatible software that can open RLF relief files.