Finally here for your viewing and printing pleasure, The Master Mando Bucket! This model was definitely a test of my skills. Didnt realize it would be so difficult to make something that seems so simple. If you want a more traditional inside as far as attaching the face sheild, I left the face sheild holder of on Helm Wout FS Holdr. You can also print the face sheild holder separatly and attach with some PLA 3D Gloop, works beatifully!
Print Settings: Creality Ender 5 Plus MatterHackers Tough PLA 220 nozzle 60 bed (turns off after first layer) Scale stl to 1183.52%
Paints I used for this were Rustoleum Gloss Black, for the base coat on the outside. All the rest of the paint in Createx Airbrush Paints, Brushed on the inside, airbrushed the green, red and silver on the outside. Clear coat is Rustoleum Gloss Clear Ultra Cover 2X. Something better can be used, but this is what I had and as long as you do very light coats for 3 or 4 times the airbrush paint should be fine.
The top of the Antenna is printed separately. It's attached to the helmet with threaded brass rod with a brass tube slipped over it. The padding on the inside is made out of EVA foam wrapped in leather, then Epoxied in place. All other leather work was custom cut and glued with hot glue attaching the large pieces that touch the inside of the helmet and Dap Rapid Fuse for the small leather details.
The photos show examples of what the potential finished product could be. A more detailed bucket for those who want to show off their creative skills. Thanks to all who purchase for your support!! More models to come!