Urfael is the sword of Talion in Middle-earth: Shadow of Mordor. The sword has served Talion in his life as a Ranger of Gondor, as a Captain of the Watch upon the Black Gate. Now, even in death, the sword serves Talion still, in his quest for vengeance, reaping a fearsome tally on the Uruk-hai of Mordor*.

Sword sliced into parts as shown in graphic. Parts are 250mm or less in height to fit most standard printers. Unsliced sword is also included. I am happy to slice the model into smaller sections, after purchase, depending on your printer.

No scaling is needed; this model was made to be a life size prop. The sowrd measures 1332 mm or 52.5 inches in length when assembled.

PRINTER SETTINGS: To save time, we reccommend a layer height of .2mm an any FDM printer. We recommend orienting the blade and hilt parts vertically on your printer, and use supports where necessary.

ASSEMBLY: The guard has been modeled with cavities to accept the blade and grip. Some sanding of the blade and grip and/or cavity may be required for fitting, depending on your printer and settings. It is recommended you print the hex keys at a high fill % for strength.

*https://shadowofwar.fandom.com/wiki/Urfael

The hilt-piece of Dirhael's shattered sword, the broken blade is still a lethal implement, re-named Acharn, meaning vengeance in Sindarin, and likewise re-purposed as a silent implement to enact its namesake upon Sauron's armies*.

Sword sliced into parts as shown in graphic. Unsliced sword is also included. I am happy to slice the model into smaller sections, after purchase, depending on your printer.

No scaling is needed; this model was made to be a life size prop. It measures 509 mm in length, or 20 inches.

PRINTER SETTINGS: To save time, we reccommend a layer height of .2mm an any FDM printer. We recommend orienting the blade and hilt parts vertically on your printer, and use supports where necessary.

ASSEMBLY: The guard has been modeled with cavities to accept the blade and handle. Some sanding of the blade and grip and/or cavity may be required for fitting, depending on your printer and settings.

*https://shadowofwar.fandom.com/wiki/Acharn

Talion's sword belt is an integral part of his costume design. This set of scabbards and accessories can be printed to create a sword belt with attached scabbards. Blades not incluided! Check my other models for the Urfael and Acharn sword blades.

What's included:

• Urfael Scabbard
• Acharn scabbard
• Sword Buckle parts
• Sword Belt Y-connector with details
• Sword belt end medallion
• Sword belt end
• Sword belt stamping pattern

Scabbards sliced into parts as shown in graphic. Unsliced scabbards also included. I am happy to slice the models into smaller sections, after purchase, depending on your printer.

No scaling is needed; this model was made to be a life size prop. Measurements for the scabbards are in the photos.

PRINTER SETTINGS: To save time, we reccommend a layer height of .2mm an any FDM printer. We recommend orienting the scabbard parts vertically on your printer, and use supports where necessary.

ASSEMBLY: The urfael scabbard comes with two different size keys. It is recommended you print the keys at a high fill % for strength.

Color preview included to match the original game model. Photos are of my own finished version of the word belt from leather and 3D printed parts.

Model and print were created by Ben Watkins, located in Columbia Missouri USA. Check us out on http://instagram.com/brassengine