Darth Vadenator 3D print model

From now on, everything I make is free. But please, if you would like to see me continue making models, I will need some help.Join Dmag Customs Patreon to support my work so I can continue providing models!patreon.com/user?u=83297167

This idea just popped in my head one day, so I googled it to see if there was already an stl and there wasn't. So, I made this! I can't express how passionate I was about getting this finished with as much detail as possible while still making it printable on FDM.This is fun to look at even without paint!

Thank you to all who support me!Every purchase goes towards future models.

PRINT SETTINGS:Printer: Ender 5 PlusMaterial: Matterhackers Silver PETG

Layer Height: 0.2Line Width: 0.4Wall Line Count: 3Top/Bottom Thickness: .8Top Layers: 8

Print Size: 700%Infill: 7%Temp: 240 Nozzle 77 Bed

Infill Speed: 35Inner Wall Speed: 45Outer Wall Speed: 35Top/Bottom Speed: 30Support Speed: 30Travel Speed 250Initial Layer Speed: 15

Retraction Distance: 7Retraction Speed 27

Fan Speed: 25%

Support Overhang Angle: 70Pattern: ZigzagSupport Wall line count: 0support Density: 30%support Z Distance: .2mmx/y Distance: .8

Build Plate Adhesion Type: BrimBrim Line Count: 15