PLEASE DON'T FORGET TO LIKE AND FOLLOW.

NEW POSTS COMING SOON.

File Contents.

*Print pictures

*3D Design pictures

*STLx6, GCODE x 2 are available.

ATTENTION: There are extra versions in the design content.

I recommend you to print after examining the parts.

If you want, you can set the design print quality yourself from the STL file.

You can print directly using the Gcode file.

Printing times may vary depending on your printer. It is stated as approx.

Print time (normal)0.15 mm precision

all : 06 h 50 min

Print time (fast) 0.3 mm precision (RECOMMENDED.)

all : 04 h 35 min

Product size:

house : x:50, y:55, z:73 mm (excluding roof)bird : x:56 y:59 z:25 mm (assembled)

Recommended settings

Printing temperature : 200 degrees

Building plate temperature: 20-40 degrees

print speed : 50 mm/s

filling density 20%-25%

These values ​​may vary depending on the characteristics of your printer.

Remember that quality is not just about design.

your printer. Your flamen calibration is also important.

This design is designed in accordance with PLA Flamentin.

For other filaments, please use the STL file.

Thank you for your support.

THE CONTENT OF THE FILE HAS LANGUAGE SUPPORT.

GermanEnglishFrenchSpanishTurkish