File Contents.

*Print pictures

*3D Design pictures

*STLx5, GCODE x 2 are available.

ATTENTION: There are extra versions in the design content. Pedestal and its own separate printing and different pedestal designs. You can personalize the product by processing on its base. If you want, you can set the design print quality yourself from the .STL file.

You can print directly using the Gcode file.

Printing times may vary depending on your printer. It is stated as approx.

Print time (normal) 0.15 mm precision

bust : 03 h 27 min

Print time (fast) 0.3 mm precision

bust : 02 h 35 min

Product size 54.6 X 55 X 100 (h) mm

Recommended settings

Printing temperature : 200 degrees

Building plate temperature: 20-40 degrees

print speed : 50 mm/s

filling density 10%

These values ​​may vary depending on the characteristics of your printer.

Remember that quality is not just about design.

your printer. Your flamen calibration is also important.

This design is designed in accordance with PLA Flamentin.

For other filaments, please use the STL file.

Thank you for your support.

THE CONTENT OF THE FILE HAS LANGUAGE SUPPORT.

GermanEnglishFrenchSpanishTurkish