File Contents.

*Print pictures.

*3D Design pictures.

• STLx2 , STEPx2 and .GCODE x 4 are available.

ATTENTION: The design consists of two parts, a bust and a pedestal.If you want, you can make your design personalized by just making changes on the pedestal. You can also set the design print quality from the .STL file if you want.

You can print directly using the Gcode file.Printing times may vary according to your article. It is stated as approx.

Print time (normal) 0.15 mm precision

bust: 6 h 40 min.

pedestal : 1 hr 57 min.

Print time (fast) 3 mm precision

bust: 4 hours 40 minutes.

pedestal : 1 hour 34 minutes.

*Product size * :66.5 x 60 x 99.3 mm

*Pedestal size * : 79 x 79 x 13 mm

Recommended settings

Printing temperature : 200 degreesBuild plate temperature: 40 degreesprint speed : 50 mm/sfilling density 10%

These values ​​may vary depending on the characteristics of your printer.

Remember that quality is not just about design.your printer. Your flamen calibration is also important.This design is designed in accordance with PLA Flamentin.

For other filaments, please use the STL file.

Thank you for your support.

THE CONTENT OF THE FILE HAS LANGUAGE SUPPORT..GermanEnglishFrenchSpanishTurkish