File Contents.

*Print pictures

*3D Design pictures

*There are STLx1 , .GCODE x 2.

ATTENTION: The design is one piece and oversized. Therefore, especially check the calibration of your printer's Z axis. You can also set the design print quality from the .STL file if you want.

You can print directly using the Gcode file.

Printing times may vary depending on your printer. It is stated as approx.

Print time (normal) 0.15 mm precision

bust : 15 h 49 min

Print time (fast) 0.3 mm precision

bust : 11 h 51 min

Product size 129.5 x 141.2 x 200mm

Recommended settings

Printing temperature : 200 degrees

Building plate temperature: 20-40 degrees

print speed : 50 mm/s

filling density 10%

These values ​​may vary depending on the characteristics of your printer.

Remember that quality is not just about design.

your printer. Your flamen calibration is also important.

This design is designed in accordance with PLA Flamentin.

For other filaments, please use the STL file.

Thank you for your support.

THE CONTENT OF THE FILE HAS LANGUAGE SUPPORT.

GermanEnglishFrenchSpanishTurkish