Basketball pendant or pin or broche 3D print model

STL parts and source 3DM model (for better compatibility saved as Rhino5 file) of Basketball pendant or badge presented in two versions of design (from two different points of view) and two subversions (embossed and debossed, one of subversions is suitable for enameling). Set also contains two versions of the bail: small one and bigger one.

Model volume varies from 361mm^3 to 433mm^3 (weight ca. from 3.5 to 4g for sterling silver ).

Relief height (or depth) is 0.3mm and that's enough for classic (non polymer) enameling process.

ZIP-archive added for more comfortable downloading (it contains the same STL's and 3DM packed in single archive).

WARNING: surface texture on the renders is shown only as example of possible finishing and must be made mechanically (by hands) during the finishing process. All parts/models has SMOOTH surfaces. The reason to not make textured surfaces is simple: 3D-printing or CNC machining due to technical limitations of equipment and producing technologies CAN'T made textured surfaces without loss of look and it can add more headache for finishing of casted metal parts. So BETTER is to make matte or textured surfaces on casted metal part.