Valve Cap Opener - reduce disposable items and save resources 3D print model

The valve cap opener is used for screwing/unscrewing standard valve caps on tires with the corresponding valve caps (including: cars, trucks, vans, two-wheelers, trailers, wheelchairs, scooters and children's scales). The integrated tread depth gauge is used to check the tread depth on motor vehicles. The measuring range is 0-7 mm.

.. Who does not know that? You're standing at the gas station, want to check the tire pressure and fill the tires with air if necessary. But once again no paper towels, the disposable gloves are already sold out, your own cleaning rag is already dirtier than the valve caps themselves. Of course, you can also use your fingers... but even after washing your hands several times, you can still clearly see that you had probably been working on a vehicle recently.

... there is another way ...

uncomplicated, environmentally friendly, saving time, money and resources. Also with clean fingers!

Every mobile citizen should check the tires on their vehicle for the optimum air pressure. Not only for your own safety on the road, but also for the environment and another positive effect, to protect your wallet. Insufficient tire pressure in motor vehicles under normal conditions consumes more energy/fuel and thus unnecessarily burdens our environment.

Likewise, the use of disposable gloves or paper towels (disposable items) to protect and keep your fingers clean when unscrewing valve caps, as well as your own cleaning rag (washing processes) or frequent hand washing (water/cleaning agent/drying) pollute our environment and resources are wasted.

The valve cap opener is a small tool with a big effect...

Used Filaments: ABS or PLA+ (for outer Parts) PP or TPU (for the inner Part)

For more Info please visit https://www.ventilkappenoeffner.de/ventilkappenoeffner/produktbeschreibung/