Transformers Tracked Medical Bed 3D print model

Next in the lineup of medical supplies for Ratchet and his fellow medical bots - presenting the tracked medical bed! This was inspired by the same as seen in the IDW comics.

Sized to be able to hold a deluxe figure, this Medical Bed allows bots to be safely and comfortably transported on this tracked bed in and out of the Medical Bay where they can receive medical care.

This model comes in parts and connects together with a bunch of 5mm pegs. The top surface of the bed can be printed in a single piece if it fits your 3d printer, or can also be printed in two parts and then assembled. There are several 5mm ports on the top of the bed to allow accessories or weapons to be added easily.

The treads come with little wheels which can be printed and pegged into place using short segments of 5mm rods. This bit is a little optional if you'll prefer to skip it.

Near the bottom of the main body, there are also 5mm ports at the front and rest, so you can add accessories or weapons there. Alternatively, if you have some 5mm hose pieces handy, you can create a convoy of these med beds or connect them elsewhere.

Do have fun 3d printing and putting this together for your display or just for playing around with! =)

[Update] This is parts of a three part set which can be combined to form a trailer for Ratchet! The other two in this set can be found here:

https://www.cgtrader.com/free-3d-print-models/games-toys/toys/transformers-medical-cargo-crate

https://www.cgtrader.com/3d-print-models/games-toys/game-accessories/transformers-med-scanner-and-med-robot

===

This model is not to be uploaded or sold in any form and is intended for personal use only.

Check out more of what we are up to over at our Facebook Page (http://www.facebook.com/FunbieStudios) or website (http:/www.FunbieStudios.com)

Support us on Patreon - https://www.patreon.com/FunbieStudios