Transformers Headmasters Gym Treadmill for Hardhead 3D print model

And here's a treadmill for Hardhead as we continue to outfit the Headmasters with the gym equipment to keep them fit!

Coming with all the latest Cybertronian technology, this whizzes a moving tread around for our heroic bots to run upon and keep up their stamina. A raised monitor and consoles on the side record the training and vital stats!

Here's a closer look at how the side monitor pegs into the lower side console portion. Both side come with a 5mm port so you can have the monitor on whichever side as you prefer.

Alternatively, the 5mm port there can be used to stow away accessories for safekeeping.

=== ASSEMBLY ===

Attached here also is the assembly diagram for all the parts of this build.

As usual, the various parts can be optionally connected using 5mm pegs. These pegs can either be 5mm rods cut to size, or by printing and using the provided pegs. These is where they go:

• 5mm x 10mm long peg - 4 of these connect the Handles to the Side pieces. The last is used to connect the monitor to the (either side's) console piece.

+5mm x 18mm long peg - 2 of these help to connect the Tread-Front and Tread-Back

+5mm x 28mm long peg - 4 of these connect the Tread-Front and Tread-Back, outwards through the Side and into the Console pieces.

===

As always, happy 3d printing this kit for your Headmasters display! =)

===

This model is not to be uploaded or sold in any form and is intended for personal use only.

Check out more of what we are up to over at our Facebook Page (http://www.facebook.com/FunbieStudios) or website (http://www.FunbieStudios.com/)

Support us on Patreon - https://www.patreon.com/FunbieStudios | Full listing of Models - https://funbiestudios.com/model-catalog