Mega Photon Beam Blaster for Transformers 3D print model

Here's another one for the Transformers' arsenal - the Mega Photon Beam Blaster!

This concept weapon features a massive jawed main body, powered by a energy backpack which connects to a central 5mm port on the back of any bot. If you have some 5mm tubing handy, that can be used to connect the two parts up too!

On the rear the blaster features a target acquisition screen on its back - all the better to help precisely lay the hurt down. And the inner piece has a pair of 5mm ports where effect parts can be added for the all too needed ooomph!

Swapping over to alt modes, the backpack can be mounted to act as a base piece for the blaster to be attached. There are the options of either mounting it facing directly forward, or have it angled slightly upwards as seen above.

=== ASSEMBLY ===

The attached image shows the various bits of this build, and how they all go together.

The Inner piece pegs to the Body using the provided 3d printable 5mm peg.

The Jaws should be printed vertically for optimal details.

===

As always, hope everyone enjoys 3d printing and do have a ton of fun adding this to your Transformers' arsenal! =)

===

This model is not to be uploaded or sold in any form and is intended for personal use only.

Check out more of what we are up to over at our Facebook Page (http://www.facebook.com/FunbieStudios) or website (http://www.FunbieStudios.com/)

Support us on Patreon - https://www.patreon.com/FunbieStudios | Full listing of Models - https://funbiestudios.com/model-catalog