Shulkie TV Suit by SPARX 3D print model

New She Hulk TV series got a lot of bad press, but I have always been a fan of Shulkie and thought the humour was very in keeping with the comic version . . . so had to have a model based on the character and costume . . . The torso’ and head parts are removable and interchangeable with magnets (see pics)

Model is 330mm tall with base.(not a full 1/6 scale as at 6foot 7inches she would be too tall for my shelving!)

1 upper torso TV suit

1 Right Arm 1 Left Arm

1 Right Leg Booted 1 Left Leg Booted

1 Head 1 Head pin

1 Base

8 items in total.

PURCHASE OF THESE FILES DOES NOT ALLOW SELLING STL FILES OR MODELS MADE FROM THE FILES. . . DOWNLOAD IS FOR SINGLE BUYER USE ONLY

I SHARE MY WORK FOR OTHERS TO ENJOY. . .PLEASE DO NOT SHARE THESE FILES ON SOCIAL MEDIA OR OTHER WEBSITES. LINKS TO THIS PAGE ARE ACCEPTED

All parts are cut files to fit build plate of small resin printers like the Photon or have separate files than the FDM versions included. These orientations work for FDM printing but you may find a better orientation that reduces support. All the parts have been printed and developed to print, A lot of prints have been produced to get the figures corrected and fault free.

Why cut into many smaller parts I have been asked?

1. If you try and assemble this, then paint it . .it would be difficult to paint into hidden areas, less masking when painting separate parts.
2. Smaller parts not only allow for Resin print at full scale, but also allow individual parts to use less supports than one larger part on FDM printers So now you know! Please do not scale down or adjust my recommended settings for infill etc. . . as you can see from the pictures this prints very well and I believe you will be pleased with the result when completed. All of my models are only released when they can print! so please do not remix or fix faults in this model then republish! If there is a fault then let me know . . message me I will answer and fix problem. . apart from that print make enjoy.

3D PRINTING SETTINGS

It is advised to add legs and arms after painting, at the very least add left arm after painting torso. Resin Printing; Hollow 2.70 Raft 95% Torso,and Legs

Hollow 2.70 Raft 115% Head

DO NOT Hollow Arms

FDM ALL at 0.16 30% fill, speed 50

ALWAYS dry assemble and “trim” parts prior gluing. Look at the picture of how to assemble parts, so that you construct and paint upper and lower parts for both figures separate before joining. ..