Gods Bastet Modesty by SPARX 3D print model

Gods-Bastet Modesty- by SPARX Started life as a shared commission, originally of Bastet for a candle mould (so no overhangs or gaps in limbs etc.) However, the head was just too cool not to use in a 3D printable model as a statue for display. I decided to create a human headed version and a second slightly more dynamic pose along with a few options on the dress before release as a 3D model. This is a full model and has all the parts required to create the model.
There are 2 upper torso’s Animal and Human, 3 dress types in Pose1 and a further open dress in Pose2. Bonus files include a torso stand as well as a pose2 dress with magnetic front panel.

A separate Bastet-Natural NSFW pack is available with a further 4 upper torso styles in further stages of undress and 2 dress styles in NSFW stages of undress, contact/message me for details.

This file contains a non adult model and is complete with all required parts.

The base is designed to be glued.

The model is1/6 scale at H259 with base.

2 upper torso’s options 3 dress lower options 2 dress front panel options 2 base (for Pose1 & Pose2) 1 Torso Stand

13 items in total.

PURCHASE OF THESE FILES DOES NOT ALLOW SELLING STL FILES OR MODELS MADE FROM THE FILES. . . DOWNLOAD IS FOR SINGLE BUYER USE ONLY

I SHARE MY WORK FOR OTHERS TO ENJOY. . .PLEASE DO NOT SHARE THESE FILES ON SOCIAL MEDIA OR OTHER WEBSITES. LINKS TO THIS PAGE ARE ACCEPTED

All parts are cut files to fit build plate of small resin printers like the Photon or have separate files than the FDM versions included. These orientations work for FDM printing but you may find a better orientation that reduces support. All the parts have been printed and developed to print, A lot of prints have been produced to get the figures corrected and fault free.

Why cut into many smaller parts I have been asked?

1. If you try and assemble this, then paint it . .it would be difficult to paint into hidden areas, less masking when painting separate parts.
2. Smaller parts not only allow for Resin print at full scale, but also allow individual parts to use less supports than one larger part on FDM printers So now you know! Please do not scale down or adjust my recommended settings for infill etc. . . as you can see from the pictures this prints very well and I believe you will be pleased with the result when completed. All of my models are only released when they can print! so please do not remix or fix faults in this model then republish! If there is a fault then let me know . . message me I will answer and fix problem. . apart from that print make enjoy.

3D PRINTING SETTINGS NONE OF THE FILES ARE ORIENTATED READY TO PRINT. This will allow you to “join” parts if you have larger printers and wish to do so . .

TIPS: Resin Printing; Hollow 2.40 Raft 100% Torso’s Legs Base

FDM ALL at 0.16 30% fill, speed 50

ALWAYS dry assemble and “trim” parts prior gluing. You can assemble the full model prior painting