B Aircrafts 7models

B Aircrafts 7models Low-poly 3D model

Description

7 kinds of airplane models in this package

Included in this package :

  • Dh60

  • Let 410

  • fock wulf

  • ilyushin-il

  • raf voyager private

  • diamond da42

-Textures for every model

-obj - fbx - mtl file format for every model

-Blender native file format

  • Preview images file

for any questions : bboodbusiness@gmail.com

*PLEASE IGNORE THIS BELOW*

The DH.60 was developed from the larger DH.51 biplane.[1] The first flight of the ADC Cirrus powered prototype DH.60 Moth (registration G-EBKT) was carried out by Geoffrey de Havilland at the works airfield at Stag Lane on 22 February 1925. The Moth was a two-seat biplane of wooden construction, it had a plywood covered fuselage and fabric covered surfaces, a standard tailplane with a single tailplane and fin. A useful feature of the design was its folding wings which allowed owners to hangar the aircraft in much smaller spaces. The then Secretary of State for Air Sir Samuel Hoare became interested in the aircraft and the Air Ministry subsidised five flying clubs and equipped them with Moths.

The prototype was modified with a horn-balanced rudder, as used on the production aircraft, and was entered into the 1925 King's Cup Race flown by Alan Cobham. Deliveries commenced to flying schools in England. One of the early aircraft was fitted with an all-metal twin-float landing gear to become the first Moth seaplane. The original production Moths were later known as Cirrus I Moths.

Three aircraft were modified for the 1927 King's Cup Race with internal modifications and a Cirrus II engine on a lowered engine mounting. The original designation of DH.60X (for experimental) was soon changed to Cirrus II Moth; the DH.60X designation was re-used in 1928 for the Cirrus III powered version with a split axle. The production run for the DH.60X Moth was short as it was replaced by later variants, but it was still available to special order.

he Ilyushin Il-76 is a multi-purpose, fixed-wing, four-engine turbofan strategic airlifter designed by the Soviet Union's Ilyushin design bureau. It was first planned as a commercial freighter in 1967, as a replacement for the Antonov An-12. It was designed to deliver heavy machinery to remote, poorly served areas.

The Diamond DA42 Twin Star is a four seat, twin engine, propeller-driven airplane developed and manufactured by the Chinese-owned, Austria-based company Diamond Aircraft Industries.[3] It was Diamond's first twin engine design, as well as the first new European twin-engine aircraft in its category to be developed in over 25 years.[4] In 2004, the DA42 became the first diesel-powered fixed-wing aircraft to perform a non-stop crossing of the North Atlantic.

lhnm
lhnm 2024-03-08 17:20:58 UTC
Nice!
3dlunatic
3dlunatic 2023-09-14 20:44:21 UTC
I did not find the Focke-Wulf in the downloads, unless it's in the Blender file which I can't open. Can you provide the Focke-Wulf as an FBX or OBJ file please?
Item rating
0 1
3dlunatic
3dlunatic 2023-09-22 01:33:17 UTC
Not Recommended
The airplane I needed, the one I bought this pack for, called Focke-Wulf, was not included in the FBX downloads. Perhaps it's in the Blender download file but I can't open that one, I don't have Blender installed. I commented, but the author did not add the Focke-Wulf as an FBX downloadable model yet. If he does, I will change my review to positive. The other planes had good geometry and you can't beat the price, so in that regard it's worth it.
B Aircrafts 7models
$5.95
 
Royalty Free License 
B Aircrafts 7models
$5.95
 
Royalty Free License 
Response 0% in 48.0h
Low-poly Modeling

3D Model formats

Format limitations
Native
  • Blender (.blend)113 MB
Exchange
  • Autodesk FBX (.fbx) (4 files)12 MB
  • OBJ (.obj, .mtl) (8 files)27.8 MB
  • Stereolithography (.stl) (2 files)8 MB

3D Model details

  • Publish date2022-04-26
  • Model ID#3663442
  • Animated
  • Rigged
  • VR / AR / Low-poly
  • PBR
  • Geometry Polygon mesh
  • Polygons 1,340,000
  • Vertices 724,420
  • Textures
  • Materials
  • UV Mapping
  • Unwrapped UVs Unknown
  • Plugins used
  • Ready for 3D Printing
Help
Chat