Saw shaped Brake Disk 3D print model

Saw shaped brake disk. The file can be printed at different scales. The files are in 1/24 scale.You can use with the Wilwood capiler from ours design too.For other scales you can use the scale table below:

1/64 - 37.5% (Not tested)1/32 - 75% (Not tested)1/25 - 96%1/24 - 100%1/18 - 133.3333%1/12 - 200%1/10 - 240%1/8 - 300%

3D printing settings

You can print with a layer height of 50μm, if you want a higher level, with 40μm you will have a better result. Layers smaller than this will make no difference.I recommend printing the discs tilted at 45ºOther printing details depend on the resin you use and the printer, but do not require special care.