Good morning all,

I offer you my version of the A-wing from Star Wars.

The ship is ultra detailed and available in two different sizes 1M long and 50cm.

In order to be accessible to the majority of commercial machines such as the Prusa Mk3, the Ultimaker 2 or the Ender-3, for example, the A-wing is divided into several modules not exceeding 200x200x200mm.

The different sections of the vessel are to be assembled together using round connectors.Some small parts (when too small) have a hole to allow the use of 1.75mm filament as a connector.

The complete assembly requires the use of glue and is intended to be painted.

Every detail has been designed so that it can be printed easily with a Ø0.4mm nozzle, I have done everything to reduce excessive overhangs.The .stl files are already oriented to get the best possible result when printing.

►Addition to come, version with detailed cockpit with the possibility of installing lights and room to mold the canopy, I will work on two possible legs so the files will have to be modified, Addition of a smaller version probably around the 25cm for magnetic levitation.

Warning:This is a fan-representation from the Star wars franchise.Also don't forget to post your achievements, don't hesitate to contact me if necessary.