Useto navigate. Pressescto quit
POLYGON COLLAR 3D print model
Description
A necklace to be printed without support.
The inner diameter is 43 cm. You can adjust the scale to suit your needs.
The grip is ensured by a wide edge set in the slicer.
3D PRINTING SETTINGS Extruder: 200°C and bed: 55°C
Layer height: 0.2 mm
Vertical hulls, perimeter: 3
Horizontal hulls, solid top layer: 3 and bottom layer: 3
Filling density: 20%.
no support required
Speed perimeters: 30 mm / s
Similar Models
to POLYGON COLLAR
