3D MODEL DESCRIPTIONHello friend, today I brought a very particular bird house, very easy to print, it is very nice to expose in your garden, terrace or where you like.

This house for birds, is equipped with a large compartment to shelter from any weather conditions, from then I made a compartment for food and water, on the sides there are cute decorations, where you can put soil, to plant just a small flower, just to give that touch of decoration, really nice.

The entrance door has a diameter of 50mm, the standard for birds, always in front of the house, we find a practical shelf where you can lean to eat, and a shelf to access inside the house.

The holes for fixing the bracket, are 5.50mm in such a way as to safely pass the 5mm pin, for fixing the whole.

The dimensions of the cottage alone, without the roof is X 150mm - Y 170mm - Z 200mm, the roof instead, measures a circumference of 231mm x 140mm in height. if you want, if you have a 220 x 220 printing surface, you can easily divide the roof into two pieces, and print it in two pieces

The decorations and the feeder, must be glued with super glue, the roof must be glued, only after fixing the bracket to the cottage, the use of super glue, I think it better, because on rainy days or snow, Maybe they’ll go and ruin the material we printed the house with.

Everything is separate, so you can print every single piece of the color you like, my photos, could be an example of printing.

I also want to remind you, that all my designs are interlocking, and have a tolerance of 0.50mm standard tolerance of all printers, if you like many others do not know what tolerance your printer has, I suggest you download my tolerance test, It’s on my profile.

As always I want to thank you for spending your time in viewing my project, and if you find it interesting, I suggest you take a look at my profile cults, because you will find a lot of interesting projects, And I’m sure you’ll find something for you, and I also remind you to leave me a like if you appreciate my work.

Good press friend and become a follower of mine

3D PRINTING SETTINGSLayer 0.20Infill 10%Top and Bottom Layer 4Perimeter Layer 3Support YesSpeed 50/60 mm/s