Upgrades that fit Printrbot Maker version 1405 3D print model

Blower fan mount: Upgrade to a powerful blower fan to improve your print quality. Fits 50 mm x 15 mm Blower Fan, Amazon Asin p/n: B071WMHNG5. The model consists of a mount that connects the blower fan to the printer and also two different manifolds that shape the flow over the hotend. These need to be fastened to the mount with screws. You may need to reduce the maximum fan speed in your slicer settings as this solution is very efficient and can even freeze filament in the hotend if used on full blast. This upgrade greatly improved the quality of my printing.

Extruder fan mount: Solve the heat creep issue. Cool your extruder with a 40X40X10mm fan such as Amazon ASIN p/n: B07CH6YC32. This mount snaps onto the extruder mount and is held in place with one screw. You will need to drill a small hole for the screw. Includes a lens cover and cutout area for an optional LED to illuminate the print area.

Shroud for stock fan: If you don't upgrade to the more powerful blower fan (recommended), you can print this STL and attach it to the stock printrbot fan.

Octoprint camera mount: Fits Amazon ASIN p/n: B013JTY8WY Arducam Raspberry Pi Camera for octoprint. Use gorilla glue super glue to attach both 45 degree ends, then attach to arm to the front of the printer with screws or glue.