THE MANDALORIAN LIVE ACTION CONCEPT VIBROBLADE 1 3D print model

One of the 3 Concept Vibroblade model for the Mandalorian Live Action Series. The vibroblade model are base on the Paul Ozzimo concept image.

The prop is convention safe with no sharp edge and the tips of the prop is slightly angled upward to prevent unwanted accident

3D PRINTING SETTINGS Material - PETG, ABS/ASA, PLA or any material suitable for FDM printer. Also some UV resin suitable for certain part of the blade.

Supports - Set to support angle to 65 degree and set to everywhere from clean overhang. The model is cut to a way that its can be print with only support touching the bed

Infill - 10% with 1,2mm shell thickness

Brim are recommended of the blade part

DLP Resin printing are recommend on the blade guard and blade gribble part