spacecraft Vostok 1 model kit 3D print model

It is a model kit of the spacecraft ‘’Vostok 1’’. The model made from 12 parts. All parts are fully adapted for 3D printing. The parts are only mechanically connected, without sticking. Large parts can be printed for time no more than 9 hours in a thin layers thickness and a very low velocity. Resulting is a high quality 3D print. It also allows the individual parts have a different color. Material PETG or PLA. Nozzle size 0.3 or 0.4 mm. layer Height 0.15 mm. Top layers 4 or 5. Infill Density 20%. Cooling 100 %. All parts are printed with support except part No 3. Part No 13 does not print. It is a piece of wire about 100 mm long and 3 mm thick. It shall be inserted in the hole of base 13 and the hole of Part No 3. Wall thickness for all parts is 1.2 mm without part 9. For part 9 wall thickness is 2.4 mm. Build Plate Adhesion: Raft (but with 0 raft top layers). Part No 9 should be heated to 60-65 ℃ and then bent.