MiG-3 1105mm span 3D print model

First flight for two versions of the Mig3. Two planes take off easily and stay in the air wellhttps://youtu.be/0vJ7rgGbgU8https://youtu.be/MFyq-5Dgf-8

-Video assembly guide is also available.https://youtu.be/ElJXtk0uMxs

RC groups thread: https://www.rcgroups.com/forums/showthread.php?3530327-Mig-3-Soviet-Fighter

http://forum.rcdesign.ru/f36/thread555202.html#post7953677

-WingSpan 1105 mm

• print weight 910g (PLA)-Flying weight 1500-1600g-6 Channels-Min. printing vol. 200x200x200mm

To build this model, you'll need:3548 1250 kV for high power or 3536 1250 kV motor eco setup50A 3S or capable ESC3S 2600 mAh battery11″x5″ propeller5x 9g servos6ch radio systemCA hinge sheetpiano wire for pushrods

3D PRINTING SETTINGSAn FDM 3D printer with:A 200mm x 200mm x 200mm build volume (or greater)A 0.4mm nozzle (reccomended)A heated build plate (reccomended)About 1kg of PLAMedium CA adhesive & accelerator