G
guyhoover 2024-02-26 18:41:37 UTCguyhoover
What size tube diameter does this model support?
Useto navigate. Pressescto quit
Ahsoka Tano lightsabers Star Wars TV 3D print model
Description
Llightsabers of the Jedi Ahsoka from Star Wars Shows The Mandalorian and Ahsoka. The longest saber is 300mmlong, not including the ring that hangs from the base. There are full versions of the hilts and versions in half to fit smaller printers. Hollow versions of all the hilts are included for adding lights and electronics!
The opening is 19.8mm, so a pole/rod/tube of 18mm or 3/4 inch can be used.
The saber end of the hollow hilts are only 3mm thick and can be drilled through to get to the hollow insides. A problem with the quality of the short saber has been fixed
limeybuilds
Hi. The opening is 19.8mm, so you could use an 18mm pole or 3/4 inch.
S
savannahhope909 2020-11-29 05:57:28 UTCsavannahhope909
are they hollow or can they be made hollow to allow electronics and led?
limeybuilds
I have added hollow versions of all the hilts! Thank you for the suggestion!
C
chris8472 chris8472
The shorter saber needs a second subdiv put on it. Its way too low res to use compared to the longer hilt.
Ahsoka Tano lightsabers Star Wars TV
Editorial No Ai License
Ahsoka Tano lightsabers Star Wars TV
Editorial No Ai License
3D Print Modeling
3D Model formats
Format limitations
- Stereolithography (.stl) (15 files)38.8 MBVersion: 2Version: 2Version: 3Version: 2Version: 2Version: 3Version: 3Version: 2Version: 3Version: 3Version: 3Version: 3Version: 5Version: 5Version: 5
3D Model details
- Publish date2020-11-27
- Model ID#2729548
- Ready for 3D Printing
Similar Models
to Ahsoka Tano lightsabers Star Wars TV
