Speed Champions Wall Mount – Fast & Furious Edition (Digital STL Files)

Designed by me for fellow fans of LEGO Speed Champions and the Fast & Furious saga, this custom wall mount is the ultimate way to showcase your favorite 8-stud wide cars and matching minifigures. Now available as a digital download so you can 3D print it yourself at home!

Designed for 2020+ Speed Champions (8-stud wide only)

This mount was specifically created to fit the newer 8-stud wide Speed Champions cars released from 2020 onwards. Earlier 6-stud models are too slim and won’t fit properly.

Important Note on Wheel Slot Design

To ensure a snug and clean grip, the wheel slot was intentionally designed with a very thin profile. This thinness is crucial for a perfect fit, but it also means the part is fragile. Avoid applying excessive force when inserting or removing the vehicle, as the slot may break under pressure.

Tested Printing Setup

This model was tested on FDM Bambu Lab printers using Bambu Studio, but it should work well on most FDM 3D printers with standard PLA and fine-tuned settings.

Included Files (4 STL files):

Full Mount – complete model to print all in one go.

For multicolor results, use a slicer like Bambu Studio to apply simple color painting or layer-based color swaps during slicing.

Base Only – no minifigure stand, no lettering.

Minifigure Stand Only – to print and glue separately if you want to customize placement.

“Fast & Furious” Letters – separate file to print in a different color.

Note: The letters were designed to be a tight fit into the main base. You may need to apply light pressure to insert them evenly. A drop of glue is optional for extra hold.

Model Dimensions:

Width: 10 cm

Height: 9.6 cm

Painting & Assembly Tips:You can either paint the model using your slicer’s color tools (ideal for Bambu Studio), or print each part separately for manual assembly. The modular approach gives more freedom for multicolor setups and precision.

Disclaimer:

This is a fan-made digital file. It is not an official product of LEGO, Universal Pictures, or the Fast & Furious franchise. All trademarks belong to their respective owners.

For personal use only

3D printing settings:

Layer height: 0.20 mm

Supports: Not required

Filament: PLA