Mindwipe Explosives Backpack from Transformers Headmasters 3D print model

In one of Scorponok's dastardly plots , the Deception Headmasters where equipped with three timed explosives to be used to blow up Vector Sigma and take the whole of Cybertron out in the blast!

The three explosives fit into a backpack which Mindwipe helped to carry on his back. The pack just fits onto the bat head part which has a little peg facing upwards.

With the doors of the pack opened up, the little bombs are stored individually in sized slots for them.

For other bots with a central 5mm port on their backs instead, there is a 5mm peg which can be used to attach the pack.

Upon reaching their target, the evil Decepticons swing open the backpack and start to lay the explosives where they will do the most damage!

As a fun little feature, the bomb also comes with a variant sporting a 5mm port on its top where effect parts can be added on for that extra little kablamooo!

=== Assembly === Here are the various parts of this set, and how they go together:

This should be a fairly easy piece to print, though the details will come out best with higher resolution settings on your printer. The doors attach to the body of the backpack using 1mm rods (we used brass rods) or likely straightened out paperclips should work nicely too. Do take note to put in the Inner part before assembling the doors, otherwise it would not fit with the doors in place.

===

Hope this set would be a nice blast from the past for your TM Decepticons - have fun 3d printing as always! =)

===

This model is not to be uploaded or sold in any form and is intended for personal use only.

Check out more of what we are up to over at our Facebook Page (http://www.facebook.com/FunbieStudios) or website (http://www.FunbieStudios.com/)

Support us on Patreon - https://www.patreon.com/FunbieStudios | Full listing of Models - https://funbiestudios.com/model-catalog