bow-weapon crossbow for the pokemon character hydreigon 3D print model

Bow (Crossbow) for humanizing the pokemon character Hydreigon Product length 160 cm. Also, you can change the size of the bow by zooming in on the details There are only 16 parts in the archive, 13 of which are repeated twice when printing ( the upper and lower parts are symmetrical in the weapon)

Each detail does not exceed 19x19cm, so that it can be printed on a small 3D printer. The largest part with a gear -18x19cm For ease of attachment, holes are made inside, the parts can be connected with magnets so that you can transport the weapon in disassembled form. But I recommend bolting the parts, as the construction will be stronger. Another Alternative is to make through holes and insert a rigid wire or pipe. if you have any questions, you can ask them e.4ngel@yandex.ru I wish you good luck in creating !

3D PRINTING SETTINGS I recommend the following print settings : Pla t = 200/60 Layer Height - 0.3 wall thickness 1.2 print speed 40 mm/s 10% infill my printer anycubic i3 mega support required time printing ( all details) - 120h ( 1,7kg)