DOMINOES PACK 3D print model

3D MODEL DESCRIPTION A domino board game for family and friends! Suitable for 2, 3 and 4 players. Dominoes are ergonomic and fit perfectly in the hand. The knuckle weight depends on the print density and can be further increased by inserting the M8 nuts during the print process. Convenient and fun storage box, assembled without fasteners immediately after printing. Great gift for friends, very durable. It will brighten up more than one evening and will not let you get bored!

3D PRINTING SETTINGS I recommend using PETG for more durability, and you can find beautiful colors for the specimens. For this, the basic requirements:

Nozzle temperature: 220-250C Table temperature: 60-80C Airflow is included from the 3rd layer.

For dominoes:

Filling 30% with triangles, no supports. In the process of printing, I recommend laying the DIN934 M8x6.5 nuts for weight. Before incerting, wash them in alcohol 90%. You can print several pieces in a slicer at once. For quality prints, use 0.12mm.

For the box:

Filling 20% ​​with triangles, no supports. Use 0.12mm for high quality printing and good looks, but it takes much more time to print.

After printing all the details of the box:

Lubricate the stud and cap, WD-40 or similar will do. Connect the cover to the basket coaxially and install the stud. Check the smoothness of the lid, if there are burrs, then remove with a clerical knife.

Put on the cap onto stud and pack the dominoes. Attention! If you put on the cap, then you will not be able to pull out the stud, the structure will be assembled.

Enjoy your games and fun evenings!