Discover the Chainmail Veil Crown, an exquisite cosplay crown featuring a unique chainmail veil. Perfect for historical and fantasy themes, this accessory showcases a stunning design, combining two pieces seamlessly with precision. This model comes in separate crown and veil parts that connect with rings for a custom fit. Ideal for costume makers and enthusiasts seeking a touch of authenticity.

Printing Settings

Printing Settings for CrownLayer Resolution: 0.2mm; Supports: Yes; Brim: Recommended; Infill Percentage: 15%; Filament Material: PLA; Nozzle Temperature: 210°C; Bed Temperature: 60°C; Nozzle Size: 0.4mm; Printer Used: Prusa i3 MK3S; Slicing Software: PrusaSlicerPrinting Settings for chainmail.It is imperative that both the general layer height and the first layer height are set to 0.3mm. The model is meticulously designed with this specific layer height in mind to ensure optimal adhesion among the rings and to the platform. Deviating from this set layer height could adversely affect the print's integrity, risking failure.Troubleshooting tip:If rings detach mid-print, it could be due to collisions while moving between rings.To prevent this, use a Z lift of 0.5 mm.Key Specifications:

• Critical Adhesion: Good adherence to the build plate is crucial for preventing warping and deformations that may ruin ring geometry, leading to assembly or wear issues.
• No Supports Needed: The model includes built-in supports where necessary.
• Adhesion Platform: A specialized platform enhances ring-to-bed adhesion, preventing print failures.
• Leveling Aid: The adhesion platform doubles as a leveling assistant.
• Optimized Layer Heights: Designed for a 0.3mm layer height for optimal adhesion between rings.
• Stringing: Use DRY filament to avoid stringing
• Slice Time: Complex polygonal design requires patience in slicing;Additional InformationEnsure your printer is well-calibrated and the bed is leveled for optimal results. Maintain bed adhesion by keeping the bed clean and free of grease. Use isopropyl alcohol for cleaning and apply adhesive if necessary