Darth Vader In Carbonite Free 3D print model

From now on, everything I make is free. But please, if you would like to see me continue making models, I will need some help.Join Dmag Customs Patreon to support my work so I can continue providing models!patreon.com/user?u=83297167

Since I already had majority of the parts, I figured I might as well go ahead and just make a carbonite version of him.

I printed him at the 3.75" figure size, as you can see there are a lot more details than what I printed. If you go larger with fdm it'll look much better. Or if you have a resin printer, this thing would look great!

Your support as always is much appreciated and every little bit earned goes towards creating more models in the future.And again, if you have any cool ideas you want to see come to life, send me a message about it! You could something you've always wanted!

PRINT SETTINGS:Slicer: CuraPrinter: Ender 3 ProMaterial: Matter Hackers Silver PETG

Layer Height: 0.2Line Width: 0.4Wall Line Count: 4Top/Bottom Thickness: 1Top Layers: 4

Print Size: 398%Infill: 7%Temp: 240 Nozzle 70 Bed

Infill Speed: 40Inner Wall Speed: 35Outer Wall Speed: 30Top/Bottom Speed: 30Support Speed: 35Travel Speed 150Initial Layer Speed: 10

Retraction Distance: 6Retraction Speed 30

Fan Speed: 25%

Support Overhang Angle: 70Pattern: ZigzagSupport Wall line count: 0Density: 20%Z Distance: .2mmx/y Distance: .8

Build Plate Adhesion Type: BrimBrim Line Count: 15