A powerful bust of Apocalypse (En Sabah Nur) from X‑Men, featuring his imposing armor, stern expression, and signature stylized headpiece with cables. Designed with high‑detail musculature, facial contours, and costume insignia. Watertight, manifold model ready for both resin and filament 3D printing. Ideal for fans, collectors, and display pieces.

Printing Details:

Printer Type: FDM (filament) or Resin (SLA/DLP)

Layer Height / Resolution: ~0.1‑0.2 mm for FDM; 0.05‑0.1 mm for resin, to capture fine facial features and armor detail gambody.com

Infill: ~20‑30% (use gyroid or cubic for strength and internal support)

Shells / Walls: 2‑3 perimeters; reinforce sharp edges like helm, armor plates, cables gambody.com

Supports: Needed under chin, under overhanging armor pieces, cables / tubes protruding from head or shoulders Cults 3D+1

Orientation: Position so that flat base is on build plate; tilt model slightly if needed to reduce support on face and armor details

Material: PLA or PETG for FDM; standard or high‑detail resin for SLA/DLP printers

Hollowing & Drain Holes: For large resin prints, hollow interior with ~2‑3 mm walls; add drain holes to avoid trapped resin or heavy print gambody.com

Build Plate Adhesion: Use brim or raft for taller busts or smaller contact area at base

Estimated Print Time: Varies with size—e.g. FDM version for a ~160 mm tall bust takes many hours (could be ~80‑90 h on some settings) gambody.com