Alien Bust Sculpture 3D Model STL Printable 3D print model

An otherworldly alien bust sculpt, showcasing elongated head features, detailed bio‑organic textures, deep eye sockets, and subtle structural tubing. Designed to evoke a sense of eerie sophistication and sci‑fi horror. The model is manifold and repair‑checked, ready for scaling, slicing, and printing.

Printing Details:

Printer Type: FDM or Resin (SLA/DLP)

Layer Height: ~0.1‑0.2 mm for FDM; 0.05‑0.1 mm for resin for fine detail

Infill: 15‑25% (gyroid or cubic works well)

Shells / Walls: 2‑3 perimeters; thicker around thin features like ridges, tubes

Supports: Required for under‑chin, overhangs in eye area, underside of head, any protruding tubing

Material: PLA or PETG for FDM; standard or high‑detail resin for SLA/DLP

Orientation: Tilt head slightly upward to minimize supports under chin; place the face looking upward to avoid large support marks

Build Plate Adhesion: Use brim/raft if base is small relative to bust height to prevent lift or warping

Optional Hollowing & Drain Holes: Especially for resin prints—hollow internals with ~2‑3 mm walls and add drain holes if resin version

Post‑Processing: Remove supports carefully, sand/polish details; resin prints need washing & curing; optional priming & painting to accent texture