M72 LAW Rockets 3D print model

These are rockets to display with your M72 versions A7 to E10. Display stands are included for each rocket as well as for an M72 LAW, which is not included. 5/64" wire or rod wil be needed to attach the fins to the back. The real rockets have a double torsion spring to flip the fins out after it leaves the tube, but I have yet to find something that would fit. Perhaps you will have better luck.

These rockets should be able to fit inside my M72 LAW design as well as a real one, however, they are meant for display. Each of the sections of the rockets are joined by a 1/4" pipe, rod or dowel to ensure accurate alignment when gluing.