Queen is a tall table lamp, with a shape that explores anthropomorphic concepts. Its geometries are developed to generate surprise. A zigzag section is repeated around the whole object. It results in acute angles all around the geometry. Even the upper technical element, which hides the lamp holder, has a series of spikes that resemble a crown. Why settle for an anonymous object when you can be surrounded by animated ones?
Dimensions when assembled: 105 x 105 x 285 mm. A 200x200x200 printing volume will be enough.
Don't stretch the model, it requires a specific hole diameter to fit the lamp holder.
To be completed, it just requires an E14 lamp holder and an E14 Led Bulb.
The two components, the base and the diffuser, are held together by the socket of the lamp holder.
What's simpler?
Check the rest of the collection on my profile!
Notes: Model thickness is 0,8 mm for diffuser and for the base.
For a good lighting result it is suggested to generate the wall with wall line count: 2, using a 0.4 mm nozzle and a layer height of 0.2 mm.
It is important to set the seam in only one point, so as to have a very clean surface.
No support is required. No post-printing is required.
Use a dark color for the head and a light color for diffuser.