Phyto barrel 3D model

Fitococcus is usually similar in appearance to an ordinary wooden barrel. Inside it there is a shop, on which a man sits [5]. The phyto barrel has two opening doors (side and top); the top cover of the barrel is provided with a cutout for the head.

The barrel is equipped with a system for supplying steam from a specialized steam generator [6]. The steam supplied under pressure is saturated with herbal preparations [1] [7] (hence the prefix phyto- in the name of the phyto-bacterium). For the phyto barrel, mixtures of dry and crushed herbs are used, which are immersed in a specially installed container for them in the steam generator [8].

Fitobochka works as follows [8] [9]. First, water is poured into the steam generator, then the phytosets are placed in the container of the steam generator. Then the required evaporating temperature is set and the steam generator is switched on. When the water reaches the boil, the steam saturated with herbs steam enters the barrel where the person is.

A distinctive feature of phytoids is that only a part of the body below the neck is exposed to the effect of steam [3] [10]. Since the head is located outside the barrel, the air receives a full-fledged atmospheric air [1] (if desired, inhalation is also possible with vapors coming out of the barrel).

As a rule, the temperature regime is 42-45 degrees and the time spent in the phyto barrel is 10-15 minutes. The model is simple to use. Suitable for any interior. Materials are configured. The textures in the set.