This is a high quality pack contain models:

• Glorbo Fruttodrillo
• Boneca Ambalabu
• Ballerina Cappuccina
• Ballerino Lololo

This models is designed to be an easy and enjoyable print! Here are some recommended settings to get you started:

Print Settings:

• Supports: Not included. Add them in your slicer if required.
• Layer Height: 0.16mm - 0.2mm (0.16mm is great for detail, 0.2mm for a faster print. You can experiment based on your preference.)
• Wall Count / Perimeters: 2-3 (Using 3 walls is generally recommended for good strength, but 2 can also work.)
• Infill: 20% (Adjust to your preference for desired strength vs. print time.)
• Brim: Generally not required if you have good bed adhesion. You can use a small brim if you notice any warping with your specific filament or printer.

Models Details:

• File Format: STL

• Approximate Dimensions:

  • Glorbo Fruttodrillo:
  • Metric: 94.9mm (X) x 126.4mm (Y) x 94.5mm (Z)
  • Imperial: 3.74 in (X) x 4.98 in (Y) x 3.7 in (Z)
  • Boneca Ambalabu:
  • Metric: 47.6mm (X) x 95.0mm (Y) x 101.7mm (Z)
  • Imperial: 1.87 in (X) x 3.74 in (Y) x 4.00 in (Z)
  • Ballerina Cappuccina:
  • Metric: 82.3mm (X) x 52.3mm (Y) x 110.7mm (Z)
  • Imperial: 3.23 in (X) x 2.06 in (Y) x 4.36 in (Z)
  • Ballerino Lololo:
  • Metric: 79.9mm (X) x 53.5mm (Y) x 114.7mm (Z)
  • Imperial: 3.15 in (X) x 2.11 in (Y) x 4.52 in (Z)

Feel free to use any filament color and type (PLA works great!) you prefer to bring your creation to life.

Happy printing!