This is a high quality pack contain models:

• Baby Tralalero Tralala Boy
• Baby Tralalero Tralala Girl
• Baby Chimpanzini Bananini
• Baby Tung Tung Tung Sahur
• Baby Brr Brr Patapim
• Baby Lirili Larila
• Baby Bombardino Crocodilo

This models is designed to be an easy and enjoyable print! Here are some recommended settings to get you started:

Print Settings:

• Supports: Not included. Add them in your slicer if required.
• Layer Height: 0.16mm - 0.2mm (0.16mm is great for detail, 0.2mm for a faster print. You can experiment based on your preference.)
• Wall Count / Perimeters: 2-3 (Using 3 walls is generally recommended for good strength, but 2 can also work.)
• Infill: 20% (Adjust to your preference for desired strength vs. print time.)
• Brim: Generally not required if you have good bed adhesion. You can use a small brim if you notice any warping with your specific filament or printer.

Models Details:

• File Format: STL

• Approximate Dimensions:

  • Baby Tralalero Tralala Boy:
  • Metric: 56.6mm (X) x 51.6mm (Y) x 65.4mm (Z)
  • Imperial: 2.23 in (X) x 2.03 in (Y) x 2.57 in (Z)
  • Baby Tralalero Tralala Girl:
  • Metric: 55.4mm (X) x 43.3mm (Y) x 64.5mm (Z)
  • Imperial: 2.18 in (X) x 1.70 in (Y) x 2.54 in (Z)
  • Baby Chimpanzini Bananini:
  • Metric: 55.5mm (X) x 37.0mm (Y) x 68.5mm (Z)
  • Imperial: 2.17 in (X) x 1.46 in (Y) x 3.7 in (Z)
  • Baby Tung Tung Tung Sahur:
  • Metric: 44.9mm (X) x 28.5mm (Y) x 61.8mm (Z)
  • Imperial: 1.77 in (X) x 1.12 in (Y) x 2.43 in (Z)
  • Baby Brr Brr Patapim:
  • Metric: 42.3mm (X) x 41.4mm (Y) x 64.3mm (Z)
  • Imperial: 1.67 in (X) x 1.63 in (Y) x 2.53 in (Z)
  • Baby Lirili Larila:
  • Metric: 82.0mm (X) x 73.7mm (Y) x 79.4mm (Z)
  • Imperial: 3.23 in (X) x 2.90 in (Y) x 3.13 in (Z)
  • Baby Bombardino Crocodilo:
  • Metric: 113.9mm (X) x 104.9mm (Y) x 72.3mm (Z)
  • Imperial: 4.48 in (X) x 4.13 in (Y) x 2.85 in (Z)

Feel free to use any filament color and type (PLA works great!) you prefer to bring your creation to life.

Happy printing!