Marvic Classic Campagnolo 5 spoke 3D print model

Front and rear wheel of the Classic Campagnolo 5 spoke model to be used in the assembly of 1/12 scale superbikes.The model is made up of files for the front wheel and rear wheel.For other scales you can use the scale table below:

1/64 - 18.75% (Not tested)1/32 - 37.5% (Not tested)1/25 - 48%1/24 - 50%1/18 - 66.6667%1/12 - 100%1/10 - 120%1/8 - 150%

3D printing settings

You can print with a layer height of 50μm, if you want a higher level, with 40μm you will have a better result. Layers smaller than this will make no difference.Other printing details depend on the resin you use and the printer, but do not require special care.