Air Filters Set 3D print model

Set of 4 types of air filters to use in your project. The filters are modeled by us and are not models that you can find on the web.

In addition, their measurements were made to be used with other parts that we have here in our inventory, such as the turbine in our profile, take a look!

Still regarding the measurements, here they are:Large conical filter: 8.3mm x 11.9mm x 8.3mm*Small conical filter: 8.3mm x 7.9mm x 8.3mm*Mushroom filter: 12.5mm x 7.3mm x 12.5mm*Angled filter: 17mm x 10.5mm x 5.5mm**Width X Height X Depth

All filters have a 4.6mm bottom nozzle

These were made for 1/24 scale, but you can scale them up to whatever size you need.

1/64 - 37.5% (Not tested)1/32 - 75% (Not tested)1/25 - 96%1/24 - 100%1/18 - 133.3333%1/12 - 200%1/10 - 240% (Not tested)1/8 - 300% (Not tested)

3D printing settings

You can print with a layer height of 50μm, if you want a higher level, with 40μm you will have a better result. Layers smaller than this will make no difference.Other printing details depend on the resin you use and the printer, but do not require special care.