3D model descriptionThis download contains a high-detail single-piece STL model of a cute pig figurine holding a heart. The sculpt features finely detailed fur/texture, expressive eyes, a decorative base, and an integrated hanging loop so the print can be used as an ornament or charm. The model is supplied in a high-resolution and a print-optimized variant.

3D printing settingsFDM (PLA / PETG)

Nozzle: 0.4 mm

Layer height: 0.12–0.24 mm (0.12 mm recommended for best detail)

Infill: 10–25%

Perimeters: 2–3

Orientation: upright with base on the bed (base is flat)

Supports: minimal supports recommended under the hanging loop, slight undercuts of the ears, and the heart area depending on your slicer. Tree supports work well.

Bed adhesion: brim or glue stick if needed

Resin (SLA / DLP)

Layer height: 0.025–0.05 mm

Orientation: tilt 10–20° to reduce visible support marks; place supports on the back of the model and loop.

Supports: standard resin supports for overhangs and loop.

Post-cure: as recommended by resin manufacturer